Hitachi NR90GC2 Cordless Gas Clipped Head Framing Nailer

Product Information

design is the ideal companion for repetitive use on jobs such as trim work, panelling, baseboards, moulding, cabinetry and much more.

They mention that it takes all sizes of nails up to 90 mm no problems, and has room for a few nails. Clipped head or 'D' head professional power tools like this allow nails to be grouped in clusters for added strength. It is fitted with a quick load rear access magazine and a two action nail feed; simply drop in the nails and pull back the feeder. Thank you JobAndKnock for the recommendations and for all your assistance, it's greatly appreciated.Accepting a 50mm-90mm clipped head, 34° angle nail capacity, driving up to 1200 nails per fuel cell the Hitachi NR90GC2/J8 is extremely efficient and coupled with its quick load magazine and up to 37 nail magazine capacity, makes it the ideal tool for repetitive nail jobs. The HiKOKI (formerly known as Hitachi) NR90GC2 cordless gas nail gun is a fantastic alternative to the Paslode IM350 nailgun. It has tons of power, when I first switched from 50mm to 90mm nails I adjusted the dial to full power (seeing as 90mm is the largest nail it takes) but it buried the head about 25mm deep.

Some manufacturers will offer a direct repair or replacement service (as applicable) which will often resolve your problem more quickly.The Hitachi NR1890DBCL/JP Brushless Framing Nailer is supplied with: 1 x Pair of Safety Glasses1 x Stackable Case2 x 18V 5. If you insist on a gas nailer (but TBH, I wouldn't) then I'd look at either the Senco GT90CH or the near identical Rawl WW90CH (which have interchangeable parts, in the main because they come from the same factory in Taiwan).

I'll stop it down further and see if I can find anything, you don't have any advice on where to start looking do you? I've just had another look, to check if something is stopping the top depressing as you have suggested and it's something to do with the mechanism that stops the nails falling out the magazine. This product carries a full 1 year manufacturers warranty covering both faulty materials and faulty workmanship, it does not cover general wear and tear or damage, batteries, blades, bulbs and other consumables. Takes a zero degree plastic collated strip nail with a nail length variation from 15mm through to 40mm. Before hiring, we must have 2 forms of ID with proof of address, and we will also take a 100 deposit.I use Paslode nails and gas because this is much easier to get than Hitachi's own brand consumables. The tool does the job easily and the depth can be adjusted, which is great for different applications. Other features include a fold away hook that fits over joists for greater convenience, a lightweight, well balanced design, longer trigger stroke for safer use and a non-slip soft rubber grip. The HiKOKI (formerly known as Hitachi) NR90GC2/J8 cordless gas nail gun is a fantastic alternative to the Paslode IM350 nailgun.