Joined in 2023 
82 
63 About this deal
The O11 AIR MINI also accommodates AIO watercooling with enough installation space for 240mm or 280mm radiators on the top, side and bottom. Again though, I have to emphasize that this testing isn’t consistent and I wouldn’t put too much weight on the results. The AIO used in the new model is different. The control mechanism for the AIO isn’t good for testing, because it doesn’t give me control over the fan speeds. The case fans and speeds are all different, and the GPU is still running on the same, old paste and is developing rattly fans – that’s why we’ve otherwise retired it. When set to the 3 slot configuration a full size GPU and Mini-ITX motherboard can be installed. Additional large radiators can be mounted above and below the motherboard. I absolutely love the this case to death after finally being able to build in a o11 based cased i have wanted to get forever and settled on the air mini since i have zero interest in custom water cooling and radiators which to me is a massive waste of time, money and hassle if anything breaks or leaks so i got this case solely for a Air cooled build and i love it so much i find my self just staring at how nice and tiny it is. Swapped all my parts out of a much larger and longer fractal meshify 2 since it took up to much desk space and was mostly empty so i love how compact and clean everything looks in a smaller case and my temps are far far better than what they were in a larger case with the ability to add more fans for airflow and im very surprised i was able to fit my large eatx motherboard in this with basically no real issues so you can in fact fit eatx up to a certain length as they mentioned and have it not affect your cable routing etc.
The mesh design on the front, top and side panels of the O11 AIR MINI have been optimized to allow maximum airflow from different sides of the case to the temperatures stable and low. The super fine mesh also acts as dust filter to avoid dust buildup inside the case. Great case, enabling a very powerful system to be installed in a form factor that doesn't take over your desk. In the 5 slots model a Mini-ITX or Micro-ATX motherboard can be installed. The extra space generated allows for a better cooling solution to be installed. This includes either a roof mounted 360 or 280 radiator. You will have noted the floor of the case is completely empty and could easily accommodate a second radiator so our key message is that Lian Li and Der8auer have come up with a clever design that gives you plenty of options.A 120 mm fan can be mounted to the rear panel. Air inlets at the bottom, roof, and side are equipped with magnetic dust filters, so the interior remains clean. The Lian Li O11 Dynamic Mini accommodates CPU coolers up to 170 mm in height meaning there are virtually no limits when choosing a powerful processor cooler. This case also supports large form factor graphics cards up to 395 mm in length. Hard Drives and PSU options The VGA-Vertical Top Mode gives more clearance for fan installation in the bottom, with 60mm total clearance. With an ATX motherboard only 240mm radiators can be installed in the bottom. My only real complaint about the O11 Air Mini came after assembly: my 3.5" Hard Disk Drives were running hot and noisy. The included thin rubber drive grommets do very little to damp vibration. I was able to fit larger and softer silicone grommets on the side mount, and placing my 7200rpm drive on these made it a lot quieter. These larger grommets cannot be used on the rear trays as there is not enough clearance for them to slide in after mounting. The close mounting to the trays also restricts airflow, which brings me to the next problem.
in questo lian li 011 AIR MINI, se si hanno i cavi cablati si ha qualche problema con il cave-management , quindi bisogna trovare un compromesso. One of the key features of the O11 Air Mini is its transformation feature, which allows the case to be altered from an ATX case with 7 PCIe slots to a MATX case that features 5 PCIe slots. This transformation adds more space to the top of the chassis for large liquid cooling radiators. This allows the O11 Air Mini to meet the needs of ATX and MATX motherboard users.ÂTEMPERATURE OTTIME, la circolazione dell'aria è OTTIMA, nel vecchio case avevo un castom liquid, ho deciso di mettere in questo nuovo case un AK620. le temperature della cpu sono quasi identiche. visto che l'aria in espulsione è molto vicina al dissipatore. The 5 Slot Mode is ideal for ITX and M-ATX motherboards and allows up to 280mm radiators to be installed at the top. If using a M-ATX motherboard, the bottom radiator can only be 240mm, but with ITX you can install up to a 280mm radiator. Entre cosas más positivas, la gestión de cables es súper fácil y no queda fea. Me gusta que tiene una bahía para discos duros que suelo usar para guardar mis ssds externos jaja ya que se accede desde el exterior, no hay que quitar la tapa. I would recommend this to anyone who wants a sleek look, while still being able to cram loads of components and cooling into their case. Volumetrically the cases are the essentially the same size but a very different shape. The steel-and-glass O11 Air Mini is a lot heavier than the aluminum-and-acrylic PC-65. The panel attachment on the O11 is also less reassuring: small screw-heads in short slots, rather than the large and deep tabs used on the PC-65. Clearly this case was not designed for the LAN parties that made the old case famous.
The power supply unit and the storage drives are housed in the right chamber of the O11 Dynamic Mini. The case supports SFX and SFX-L form factor power supplies and offers bays for a total of four drives: RECENSIONE: mi piace molto questo case, decisamente più piccolo del tuf gaming501 (il che devo dire che è lo stesso un case da paura, ma che per motivi di spazio e stile ho deciso di cambiarlo). Optimized Dust Management The mesh panels of O11 Air Mini are designed as dust filters and intake sufficient air into the chassis. But this couldn’t be further from the truth with the O11 Air Mini. I like the look of its front mesh panel more than glass, and it performs a smidge better. The included fans are actually reasonably good, and the case has a more practical interior with support for ATX power supplies, instead of being limited to SFX-only. Even in 7 slot mode, we could fit a 240mm radiator in this case (with fans) when using low profile DRAM kits in 7 slot mode. That said, wider 280mm radiators wouldn’t fit in 7-slot mode, as it would interfere with DRAM and motherboard components.ÂÂ
In its full 7 slot configuration installing an ATX motherboard is possible.Fans can be mounted to the roof and there is space beside the motherboard to attach a radiator as well as a second radiator to the bottom of the case. La ventilación es muy buena y no se suele llenar de polvo sin facilidad. Tenía un Asus TUF GT 301 y ese si se llenaba de polvo bastante.
Great Deal 
New Comment